Changing The Fuses Of Individual Electrical Power Consumers - KTM 250 EXC 2023 Owner's Manual

15.5

Changing the fuses of individual electrical power consumers

Info
The fuse box containing the fuses of individual electrical power consumers is located under the seat.
–
Mount the EFI control unit
S04883-11
Finishing work
–
Mount the seat. (
Preparatory work
–
Remove the seat. (
Main work
–
Open fuse box cover
–
Remove the faulty fuse.
Guideline
(All EXC models)
Fuse 1 - 10 A - EFI control unit, lambda sensor, oil
pump, combination instrument, electronic fuel injection,
diagnostics connector
Fuse 2 - 10 A - horn, brake light, radiator fan (optional),
S03498-10
turn signal (optional)
Fuse 3 ‑ 10 A ‑ high beam, low beam, position light, tail
light, license plate lamp
Fuse 4 - 5 A - fuel pump
(All standard XC-W models)
Fuse 1 - 10 A - EFI control unit, oil pump, combination
instrument, electronic fuel injection, diagnostics con-
nector
Fuse 2 - 10 A - radiator fan (optional)
Fuse 3 - 10 A - low beam, position light, tail light
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
ELECTRICAL SYSTEM 15
1
on the rubber lugs
p. 78)
p. 78)
1
.
A
2
.
.
121