12 SERVICE WORK ON THE CHASSIS
12.15
12.16
76
Lubricating the steering head bearing
H02387-01
Removing front fender
V00340-10
V00341-10
(All standard models)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubri-
cated in the course of removal and installation of
the lower triple clamp.
(All special models)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubri-
cated in the course of removal and installation of
the lower triple clamp.
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws
.
–
2
Remove screws
. Take off front fender.
(
p. 68)
(
p. 69)
(
p. 68)
(
p. 72)
p. 122)