Intended Audience; Conventions - Nortel CS 1000M HG Manual

Fiber remote multi-ipe interface fundamentals
Table of Contents

Advertisement

10 About this document
System migration
When particular Meridian 1 systems are upgraded to run CS 1000 Release
4.5 software and configured to include a Signaling Server, they become
CS 1000M systems.
(page 10)
a CS 1000M system.
Table 1
Meridian 1 systems to CS 1000M systems
This Meridian 1 system...
Meridian 1 PBX 51C
Meridian 1 PBX 61C
Meridian 1 PBX 81
Meridian 1 PBX 81C
For more information, see Communication Server 1000M and Meridian 1
Large System Upgrades Overview (NN43021-458).

Intended audience

This document is intended for individuals who are responsible for installing
and maintaining Fiber Remote Multi-IPE units as part of a CS 1000M Large
System or Meridian 1 Large System.

Conventions

Terminology
The following systems are referred to generically as "Large System":
Copyright © 2007, Nortel Networks
.
Meridian 1 PBX 61C
Meridian 1 Option 71
Meridian 1 PBX 81
Meridian 1 PBX 81C
Note: When upgrading software, memory upgrades may be
required on the Signaling Server, the Call Server, or both.
Table 1 "Meridian 1 systems to CS 1000M systems"
lists each Meridian 1 system that supports an upgrade path to
Communication Server 1000M Half Group (CS 1000M HG)
Communication Server 1000M Single Group (CS 1000M SG)
Communication Server 1000M Multi Group (CS 1000M MG)
Meridian 1 Option 51
Meridian 1 PBX 51C
Meridian 1 PBX 61C
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 01.01 Standard
Release 5.0 30 May 2007
Maps to this CS 1000M system
CS 1000M Half Group
CS 1000M Single Group
CS 1000M Multi Group
CS 1000M Multi Group

Advertisement

Table of Contents
loading

Table of Contents