Table of Contents
Advertisement
Table 6.2 IP00/UL Open Type Exterior and Mounting Dimensions for Models T208 to T720
Model
W
312
T208 - T302
(12.28)
440
T371 - T414
(17.32)
510
T477 - T720
(20.08)
◆
Moving the Drive
Obey local laws and regulations when you move and install this product.
CAUTION
Crush Hazard. Tighten terminal cover screws and hold the case safely when you move the drive. If the drive or
covers fall, it can cause moderate injury.
< 15 kg (33 lbs.)
≥ 15 kg (33 lbs.)
Refer to
Using the Hanging Brackets to Move the Drive on page 15
systems, wires, or hanging metal brackets to move the drive.
◆
Using the Hanging Brackets to Move the Drive
Use the hanging brackets attached to the drive to temporarily lift the drive when you install the drive to a control
panel or wall or when you replace the drive. Do not let the drive stay vertically or horizontally suspended or move the
drive over a long distance while it is suspended.
Before you install the drive, make sure that you read these precautions:
WARNING
Crush Hazard. Before you hang the drive vertically, use screws to correctly attach the drive front cover and other
drive components. If you do not secure the front cover, it can fall and cause minor injury.
WARNING
Crush Hazard. When you use a crane or hoist to lift the drive during installation or removal, prevent more than
1.96 m/s
2
(0.2 G) vibration or impact. Too much vibration or impact can cause serious injury or death from falling equipment.
YASKAWA TOEPC71061782C GA800 Drive Installation & Primary Operation
H
D
700
420
(27.56)
(16.54)
800
472
(31.50)
(18.58)
1136
480
(44.72)
(18.90)
Drive Weight
Dimensions mm (in)
W1
W2
218
218
(8.58)
(8.58)
370
370
(14.57)
(14.57)
450
450
(17.72)
(17.72)
Persons Necessary to Move the Drive
2 + using appropriate lifting equipment
for information about how to use suspension
6 Mechanical Installation
H1
H2
659
28
(25.94)
(1.10)
757
28
(29.80)
(1.10)
1093
25.5
(43.03)
(1.00)
1
d
M10
M12
M12
15
Advertisement
Table of Contents
