Table of Contents
Advertisement
• The Relationship Between Oscillator Frequency f
Rate Frequency f
FR
S1D10605
When the internal oscillator circuit is used
*****
When the internal oscillator circuit is not used
S1D10606
When the internal oscillator circuit is used
*****
When the internal oscillator circuit is not used
S1D10607
When the internal oscillator circuit is used
*****
When the internal oscillator circuit is not used
S1D10608
When the internal oscillator circuit is used
*****
When the internal oscillator circuit is not used
S1D10609
When the internal oscillator circuit is used
*****
When the internal oscillator circuit is not used
(f
is the liquid crystal alternating current period, and not the FR signal period.)
FR
References for items market with *
*1 While a broad range of operating voltages is guaranteed, performance cannot be guaranteed if there are
sudden fluctuations to the voltage while the MPU is being accessed.
*2 The operating voltage range for the V
when the external power supply is being used.
*3 The A0, D0 to D5, D6 (SCL), D7 (SI), RD (E), WR (R/W), CS1, CS2, CLS, CL, FR, M/S, C86, P/S, DOF,
RES, IRS, and HPM terminals.
*4 The D0 to D7, FR, FRS, DOF, and CL terminals.
*5 The A0, RD (E), WR (R/W), CS1, CS2, CLS, M/S, C86, P/S, RES, IRS, and HPM terminals.
*6 Applies when the D0 to D5, D6 (SCL), D7 (SI), CL, FR, and DOF terminals are in a high impedance state.
*7 These are the resistance values for when a 0.1 V voltage is applied between the output terminal SEGn or
COMn and the various power supply terminals (V
voltage (3) range.
= 0.1 V/∆ I (Where ∆ I is the current that flows when 0.1 V is applied while the power supply is ON.)
R
ON
*8 See Table 9-7 for the relationship between the oscillator frequency and the frame rate frequency.
*9 The V
voltage regulator circuit regulates within the operating voltage range of the voltage follower.
5
*10 This is the internal voltage reference supply for the V
chips, the temperature range can come in three types as V
(2) –0.2%/°C, and (3) external input.
*11, 12 It indicates the current consumed on ICs alone when the internal oscillator circuit and display are turned
on.
The S1D10605 is 1/9 biased, S1D10606/S1D10608/S1D10609 is 1/8 biased and S1D10607 is 1/6 biased.
Does not include the current due to the LCD panel capacity and wiring capacity.
Applicable only when there is no access from the MPU.
*12 It is the value on a model having the V
regulator internal resistor is used.
Rev.2.1
, Display Clock Frequency f
OSC
Table 25
Item
system and the V
DD
option temperature gradient is –0.05%/°C when the V
REG
EPSON
f
f
OSC
____
External input (f
f
OSC
____
External input (f
f
OSC
____
External input (f
f
OSC
____
External input (f
f
OSC
____
External input (f
system is as shown in Figure 30. This applies
5
, V
, V
, and V
). These are specified for the operating
1
2
3
4
voltage regulator circuit. In the S1D10605 Series
5
options: (1) approximately –0.05%/°C,
REG
S1D10605 Series
and the Liquid Crystal Frame
CL
f
CL
FR
f
OSC
_____
4 × 65
4
)
f
CL
CL
____
260
f
OSC
_____
8 × 49
8
)
f
CL
CL
____
196
f
OSC
_____
8 × 33
8
)
f
CL
CL
____
264
f
OSC
_____
8 × 55
8
)
f
CL
CL
____
220
f
OSC
_____
8 × 53
8
)
f
CL
CL
____
212
5
voltage
59
Advertisement
Table of Contents
