Removing Debris From The Cooling System; Changing The Engine Coolant - Toro Workman HDX-D Operator's Manual

Removing Debris from the
Cooling System
Service Interval: Before each use or daily—Remove
debris from the engine area and
radiator. (Clean it more frequently in
dirty conditions.)
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the engine and remove the key.
4. Clean the engine area thoroughly of all debris.
5. Unlatch and remove the radiator screen from the
front of the radiator
Figure 52
1. Radiator screen
2. Latch
6. If equipped, rotate the latches and pivot the oil
cooler away from the radiator
Figure 53
1. Radiator housing
2. Oil cooler
7. Clean the radiator, oil cooler, and screen with
compressed air.
Note:
Blow debris away from the radiator.
(Figure 52).
(Figure 53).
3. Latches
8. Install the cooler and screen to the radiator.
Changing the Engine
Coolant
Service Interval: Every 1,000 hours/Every 2 years
Cooling-system capacity: 3.7 L (4 US qt)
Coolant type: a 50/50 solution of water and
permanent ethylene-glycol antifreeze
Contact your authorized Toro distributor.
g010315
g010316
52
(whichever comes first)—Change
the engine coolant.