Torquing The Wheel Lug Nuts - Toro Workman HDX-D Operator's Manual

Figure 49
1. Tie rods
B. Rotate both tie rods equally to move the
front of the tires inward or outward.
C. Tighten the tie rod jam nuts when the toe-in
adjustment is correct.
Torque the tie rod jam nuts to 62 to 74 N∙m
(45 to 55 ft-lb).
7. After completing the toe-in adjustment, ensure
that there is full steering travel in both directions.
There should be no contact between any
machine components as you move the wheels
from lock to lock. Adjust, if necessary.
g010329
2. Jam nuts
Torquing the Wheel Lug
Nuts
Service Interval: After the first 2 hours
After the first 10 hours
Every 200 hours
Wheel lug nut torque specification: 109 to 122 N∙m
(80 to 90 ft-lb)
Torque the lug nuts at the front and rear wheels
in a crossing pattern as shown in
specified torque.
50
Figure 50 to the
Figure 50
g034007