Installing The Swingarm - Yamaha PW50W 2007 Service Manual

REAR SHOCK ABSORBER ASSEMBLY AND SWINGARM

INSTALLING THE SWINGARM

1. Install:
9 Oil seal
9 Swingarm
9 Rear axle nut
9 Swingarm bolt (front)
9 End cap
9 Swingarm bolt (rear)
9 Rear shock absorber bolt (lower/right)
2. Tighten
9 Swingarm bolt (front)
9 Swingarm bolt (rear)
9 Rear axle nut
9 Rear shock absorber bolt (lower/right)
NOTE:
While apply the rear brake to tighten the rear
axle nut.
3. Install:
9 Exhaust chamber assembly
9 Muffler.
Refer to "ENGINE REMOVAL" in chapter
5.
4-34
CHAS
29 Nm (2.9 m·kg, 21 ft·lb)
33 Nm (3.3 m·kg, 24 ft·lb)
60 Nm (6.0 m·kg, 43 ft·lb)
23Nm (2.3 m·kg, 17 ft·lb)