FRONT WHEEL, REAR WHEEL AND BRAKE
3. Measure:
9 Radial wheel runout
9 Lateral wheel runout b
Over the specified limits → Replace the
wheel.
Radial wheel runout limit
2.0 mm (0.08 in)
Lateral wheel runout limit
2.0 mm (0.08 in)
4. Check:
9 Wheel bearings
Front wheel turns roughly 1 or is loose →
Replace the wheel bearings.
DISASSEMBLING THE FRONT WHEEL
1. Remove:
9 Oil seals
9 Wheel bearings
MMMMMMMMMMMMMMMMMMMMMMM
a. Clean the outside of the front wheel hub.
b. Remove the oil seal 1 with a flat-head
screwdriver.
NOTE:
To prevent damaging the wheel, place a rag
between the screwdriver and the wheel sur-
face.
c. Remove the wheel bearings 2 with a
general bearing puller 3.
LLLLLLLLLLLLLLLLLLLLLLL
4-4
CHAS
a