Special Tools - Yamaha PW50W 2007 Service Manual

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use
only the appropriate special tools as this will help prevent damage caused by the use of inappro-
priate tools or improvised techniques. Special tools, part numbers or both may differ depending on
the country.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No.
90890-01189
YM-01189
90890-01235
YU-01235
90890-01252
90890-01274
YU-90058
90890-01275
YU-90060
90890-01278
YU-90063
90890-01306
YM-01306
Tool name/Usage
Flywheel puller
This tool is used for removing the rotor.
Rotor holding tool
This tool is necessary for removing and
installing the rotor.
Dial gauge and stand set
These tools are for measuring the
crankshaft runout.
Crankshaft instoller pot
This tool is necessary for installing the
crankshaft.
Crankshaft installer bolt
This tool is necessary for installing the
crankshaft.
Adapter (M12)
This tool is necessary for installing the
crankshaft.
Hex. wrench (25 mm)
This tool is needed for removing the mid-
dle gear screw.
SPECIAL TOOLS
1-5
GEN
INFO
Illustration