Using The Partial Magnify Feature; Freezing The Screen; Temporarily Blanking The Screen - ViewSonic PJ400-2 User Manual

Using the partial magnify feature

1.
Press the ON button of MAGNIFY on the remote control.
The "MAGNIFY" indication will appear on the screen
(although the indication will disappear after several seconds
with no operation.), and the projector will enter the MAG-
NIFY mode.
2.
Use the cursor buttons ▲/▼ to adjust the zoom level.
To move the zoom area, press the POSITION button in the MAGNIFY mode,
then use the cursor buttons ▲/▼/◄/►. And to finalize the zoom area, press
the POSITION button again.
To exit the MAGNIFY mode and restore the screen to normal, press the OFF
button of MAGNIFY on the remote control.
● The projector automatically exits the MAGNIFY mode when the input signal
changes, or when an operation of changing the display condition (automatic
adjustment, etc.) is executed.
● Although the keystone distortion condition may vary in the MAGNIFY mode, it
will be restored when the projector exit the MAGNIFY mode.

Freezing the screen

1.
Press the FREEZE button on the remote control.
The "FREEZE" indication will appear on the screen, and
the projector will enter the FREEZE mode.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
● The projector automatically exits the FREEZE mode when the input signal
changes, or when one of the projector's buttons or the remote control buttons
of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME,
MUTE, KEYSTONE, POSITION and MENU is pressed.
● If the projector continues projecting a still image for long time, the LCD panel
might possibly be printed. Do not leave the projector in FREEZE mode for too
long.

Temporarily blanking the screen

1.
Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen
of input signal. Please refer to the item BLANK of section
SCREEN menu
To remove the blank screen and return to the input signal screen, press the
BLANK button again.
● The projector automatically returns to the input signal screen when the input
signal changes, or when one of the projector's buttons or the remote control
buttons are pressed.
ViewSonic
.
PJ400
Operating
VIDEO SEARCH
RGB
BLANK
ASPECT AUTO
SEARCH
VIDEO RGB
ASPECT AUTO BLANK
MAGNIFY
MAGNIFY
VOLUME
VOLUME
ON
ON
MUTE
OFF
FREEZE KEYSTONE
MUTE
OFF
- ZOOM
+
POSITION MENU
FREEZE KEYSTONE
ENTER
ESC RESET
- ZOOM
+
POSITION MENU
ENTER
ESC RESET
VIDEO SEARCH
RGB
ASPECT AUTO BLANK
MAGNIFY
VOLUME
ON
VIDEO RGB SEARCH
ASPECT AUTO BLANK
MAGNIFY
VOLUME
MUTE
ON
OFF
MUTE
OFF
FREEZE
KEYSTONE
FREEZE KEYSTONE
- ZOOM
+
POSITION MENU
- ZOOM
+
ENTER
ESC RESET
POSITION MENU
ENTER
ESC RESET
VIDEO RGB SEARCH
ASPECT AUTO BLANK
MAGNIFY
VOLUME
ON
MUTE
OFF
SEARCH
VIDEO RGB
FREEZE KEYSTONE
-
ZOOM +
ASPECT AUTO BLANK
POSITION MENU
ENTER
MAGNIFY
ESC RESET VOLUME
ON
MUTE
OFF
FREEZE
KEYSTONE
-
ZOOM
+
MENU
POSITION
ENTER
RESET
ESC
21