Using The Magnify Feature; Freezing The Screen - ViewSonic PJ750 User Manual

Using the Magnify Feature

NOTE:
The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT, AUTO,
ASPECT or VIDEO feature is used, or if there is a change in the input signal's state.

Freezing the Screen

NOTE:
• The projector will automatically exit FREEZE mode if either the POSITION, VOLUME,
MUTE, AUTO, BLANK ON/OFF, or MENU ON/OFF feature is used, or if there is a change in
the input signal's state.
• If the projector continues project
1 Press the MAGNIFY (ON) button
The projector enters MAGNIFY mode.
2 Press the POSITION button, then use the
buttons to select the area to enlarge and then
,
press the POSITION button again to confirm your selec-
tion.
3 Press the ,
Press the MAGNIFY (OFF) button to exit MAGNIFY mode and restore
the screen to normal. (The projector will also automatically exit MAG-
NIFY mode if there is a change in the input signal's state.)
1 Press the FREEZE button
The icon appears and the screen will freeze at the current image. Press
the FREEZE button again and the
FREEZE MODE.
buttons to zoom in and out of the selected area.
appears as the projector exits
,
,
ViewSonic PJ750
19