Freezing The Screen; Using The Magnify Feature - ViewSonic PJ1172 User Manual

Freezing The Screen

Press the FREEZE button.
1
As illustrated on the right, a dialog
will appear on the screen, and the
screen will freeze at the current
image.
Press the FREEZE button again to
2
restore the screen to normal.
The icon "||" will change to the icon " ". And after a couple
of seconds, the dialog will be closed and the screen will be
restored to normal.
The freezing feature will automatically finish if a remote
memo
control's button that changes some display state (ex.
blanking the screen, displaying a dialog or a menu,
adjusting the picture, changing the input signal) is pressed,
or a button of projector is pressed.
NOTE
• If the projector continues projecting the same image for a long time (i.e. you forget to exit
FREEZE mode), the image might possibly remain as an afterimage. Do not leave the
projector in FREEZE mode for too long.

Using The Magnify Feature

Press the MAGNIFY
1
As illustrated on the right, a dialog
will appear on the screen to aid you
in magnifying the picture.
Press the POSITION button, then
2
use the cursor buttons
select the area to zoom.
Press the POSITION button again to finalize the zoom
3
area.
Use the cursor buttons
4
Press the MAGNIFY
5
restore the screen to normal.
The magnify feature will automatically finish if the
memo
automatic adjustment is execute, or the aspect, the signal
type mode of video or the signal input state is changed.
button.
/ / / to
/ to adjust the zoom level.
button to close the dialog and
FREEZE
button
Cursor
buttons
POSITION
button
MAGNIFY
buttons
ViewSonic PJ1172 18