Related Manuals for ViewSonic PJ406D
Summary of Contents for ViewSonic PJ406D
- Page 1 ViewSonic ® PJ406D DLP Projector - User Guide - Guide de l'utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell'utente - Guia do usuário - Användarhandbok - Käyttöopas - Pyководство польэователя - 使用手冊 - 使用手冊...
-
Page 2: Compliance Information
92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” User Information for all Countries Notice: Use the cables which are included with the unit or specified. ViewSonic PJ406D... -
Page 3: Important Safety Instructions
ViewSonic PJ406D... -
Page 4: Copyright Information
DPMS and DDC are trademarks of VESA. PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. -
Page 5: Table Of Contents
On-Screen Display Menus ...17 How to operate ...17 Menu Tree ...18 Language ...19 Colour Setting ...19 Image-I ...20 Image-II ...22 Management ...23 Lamp Setting ...25 Troubleshooting ...26 Replacing the lamp ...30 Compatibility Modes ...31 Customer Support ...32 Limited Warranty ...33 ViewSonic PJ406D... -
Page 6: Precautions
Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit. ViewSonic PJ406D Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. - Page 7 Don’t: ViewSonic PJ406D Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
-
Page 8: Product Features
Product Features This product is an SVGA single chip 0.55” DLP Outstanding features include: ViewSonic PJ406D True SVGA, 800x 600 addressable pixels Single chip Dark Chip2 NTSC/NTSC4.43/PAL/PAL-M/PAL-N/SECAM and HDTV compatible (480i/p, 576i/p, 720p, 1080i) Multi-Auto functions: Auto detection, Auto image and ... -
Page 9: Package Overview
Composite Video Cable Due to the differ- ence in applica- tions for each country, some regions may have different accessories. ViewSonic PJ406D Quick Start Guide ViewSonic Wizard CD Power Cord VGA Cable 1.8m Soft Case 2 x Batteries Remote Control... -
Page 10: Product Overview
Product Overview 1. Control Panel 2. Zoom Lever 3. Focus Ring 4. Zoom Lens 5. Elevator Foot 6. Elevator Button 7. IR Receivers 8. Connection Ports 9. Power Socket ViewSonic PJ406D Main Unit... -
Page 11: Control Panel
1. Temp Indicator LED 2. Power Indicator LED 3. Lamp Indicator LED 4. Power/Standby 5. Menu (On/Off) 6. Re-Sync 7. Keystone Correction 8. Four Directional Select Keys 9. Source 10. Enter ViewSonic PJ406D Control Panel TEMP TEMP TEMP TEMP TEMP TEMP MENU POWER... -
Page 12: Connection Ports
1. IR Receiver 2. USB Connector (service only) 3. Monitor Loop-through Output Connector 4. Composite Video Input Connector 5. S-Video Input Connector 6. Audio Input Connector 7. PC Analog signal/SCART RGB/HDTV/Component Video Input Connector 8. Kensington Lock Port ViewSonic PJ406D... -
Page 13: Remote Control
ViewSonic PJ406D Remote Control 1. Power 2. IR LED 3. Hide Freeze 5. Source Lock 6. Display Mode 7. Menu 8. Keystone Correction 9. Whisper 10. Volume+ 11. Volume- 12. Reset 13. Enter 14. Four Directional Select Keys 15. Re-Sync 16. -
Page 14: Connecting The Projector
4..S-Video Cable (Optional Accessory) accessories. 5..D-15 to RCA Adapter for YPbPr (Optional Accessory) ViewSonic PJ406D DVD Player, Settop Box, HDTV receiver S-Video Output To ensure the projector works well with your computer, please set the display mode of your graphic card less than or equal to 1280 X 1024 resolution. -
Page 15: Powering On/Off The Projector
Turn on the projector fi rst and then the signal sources. ViewSonic PJ406D Powering On the Projector connected. The Power LED will turn Orange. the control panel. The startup screen will display for 10 seconds and the Power LED will turn green. -
Page 16: Powering Off The Projector
5. Do not turn on the projector immediately following a power ViewSonic PJ406D Powering Off the Projector tor lamp, you will see a message as below on the on-screen display. cooling cycle and the Power LED will fl ash orange. When the light stops fl... -
Page 17: Adjusting The Projected Image
2. Lower the image, then release the button to lock the eleva- tor foot into position. 3. Use ViewSonic PJ406D Adjusting the Projector Image Height the button to lock the elevator foot into position. to fi ne-tune the display angle. -
Page 18: Adjusting The Projector Zoom / Focus
4.9 to 32.8 feet (1.5 to 10.0 me- ters). Screen (Diagonal) Screen Size This graph is for user’s reference only. ViewSonic PJ406D Adjusting the Projector Zoom / Focus Adjusting Projection Image Size 38.1" (96.8cm) 34.7" (88.1cm) 4.9'... -
Page 19: Control Panel & Remote Control
Keystone Four Directional Select Keys your selection. Enter Re-Sync ViewSonic PJ406D Control Panel POWER TEMP LAMP MENU Refer to the “Power On/Off the Projector” section on pages 11-12. Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite Video and HDTV sources. - Page 20 Composite S-Video ViewSonic PJ406D Refer to the “Power On/Off the Projector” section on pages 11-12. Using the button to turn on/off the whisper mode when whisper mode is on, acoustic noise and screen brightness are reduced. Increase/decrease speaker volume.
-
Page 21: On-Screen Display Menus
The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. ViewSonic PJ406D How to operate To open the OSD menu, press “Menu or Control Panel. -
Page 22: Menu Tree
Menu Tree Colour setting Lamp setting ViewSonic PJ406D Image-I Display mode Brightness Contrast White intensity Colour temp. Video Saturation Sharpness Image-II Computer Frequency Computer Phase Computer Hor. position Computer Ver. position Degamma Aspect ratio Ver. Shift(16:9) Green Blue Yellow Cyan... -
Page 23: Language
ViewSonic PJ406D Language Choose the multilingual OSD menu . Use the select your preferred language. Press “Enter” to fi nalize the selection. Colour Setting Adjust the Red, Green, Blue, Yellow, Cyan and Magenta colors for advanced adjustment of the individual colors. -
Page 24: Image-I
ViewSonic PJ406D Display Mode There are many factory presets optimized for various types of images. PC: For computer or notebook. Movie: For home theater. Normal: For normal viewing condition. sRGB: For standard color. User: Memorize user’s settings. - Page 25 “Saturation” function is not supported under computer mode. ViewSonic PJ406D Saturation Adjusts a video image from black and white to fully saturated color. Press the to decrease the amount of color in the image. Press the to increase the amount of color in the image.
-
Page 26: Image-Ii
Ver. Shift (16:9) Adjust the image position to up or down, when you select the aspect ratio to 16:9. ViewSonic PJ406D Press the to move the image left. Press the to move the image right. Press the to move the image down. -
Page 27: Management
ViewSonic PJ406D Menu Location Choose the menu location on the display screen. Projection Front-Desktop The factory default setting. Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen. Front-Ceiling ... - Page 28 ViewSonic PJ406D Translucence Choose the menu transparency on the display screen. Volume Press the to decrease the volume. Press the to increase the volume. Reset Return the adjustments and settings to the factory default values. Execute: Returns the settings for all menus to factory default values.
-
Page 29: Lamp Setting
Auto Power Off Sets the interval of power-off of the system, if there is no signal input. (In minutes) Sleep Timer Sets the interval of power-off of the system, if there is no signal input. (In minutes) ViewSonic PJ406D... -
Page 30: Troubleshooting
Problem: Partial, scrolling or incorrectly displayed image. ViewSonic PJ406D Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. - Page 31 Problem: Image has vertical fl ickering bar ViewSonic PJ406D 4. Verify the resolution setting is less than or equal to 1280 x 1024 resolution. 5. Select the “Change” button under the “Monitor” tab . 6. Click on “Show all devices.” Next, select “Standard monitor types”...
- Page 32 Error (Over Temp.) Error (Lamp cover failed) ViewSonic PJ406D Adjusts the Focus Ring on the projector lens. Refer to page 14. Make sure the projection screen is between the required distance 4.9 to 32.8 feet (1.5 to 10.0 meters) from the projector.
- Page 33 Problem: Message Reminders ViewSonic PJ406D Standby : Replacing the lamp : Fan failed : Over temperature : Lamp life exceeded :...
-
Page 34: Replacing The Lamp
The bulb may shatter and cause injury if it is dropped. ViewSonic PJ406D Make sure the projector has been cooled down for at least 30 Lamp Replacing Procedure: 1. Switch off the power to the projector by pressing the Power button. -
Page 35: Compatibility Modes
Compatibility Modes Remark : 1.> “ ”compressed computer image. 2.> The interlaced analog signals are not supported. ViewSonic PJ406D Mode Resolution VESA VGA 640 x 350 VESA VGA 640 x 350 VESA VGA 640 x 480 VESA VGA 640 x 480... -
Page 36: Customer Support
(VSJP) Hong Kong www.hk.viewsonic.com/support/ (VSHK) Macau Korea www.viewsonic.com Other Asia Pacific www.viewsonic.com (VSSD) ViewSonic PJ406D T = Telephone Email F = FAX T= (800) 688-6688 service.us@ F= (909) 468 1202 viewsonic.com T= (866) 463 4775 service.ca@ viewsonic.com T= 0207 949 0307 service.eu@... -
Page 37: Limited Warranty
ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like product.