ViewSonic PJ400-2 User Manual page 40

Portable svga 3lcd projector with keystone correction
Hide thumbs Also See for PJ400-2:
Table of Contents

Advertisement

Multifunctional settings
SCREEN menu (continued)
Item
START UP
MyScreen
ViewSonic
Using the buttons ▲/▼ switches the mode for the start up screen.
The start up screen is the screen displayed when no signal or an
unsuitable signal is detected.
MyScreen  ORIGINAL  TURN OFF
MyScreen is the screen you can register a desired screen.ORIGI-
NAL screen is the existing standard screen. When the TURN OFF
is selected, the BLACK screen is used.
• To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLANK screen after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it
will change to the BLACK screen.
• For the MyScreen, please refer to the item MyScreen
About the BLANK screen, please refer to the item BLANK.
This item functions for capturing the MyScreen of the blank screen
and the start up screen. Please execute displaying the input includ-
ing the picture you want to capture.
1. Choosing this item displays a dialog
titled "MyScreen". It will ask you if
you start capturing the picture from
the current screen. Please wait for
the target picture to be displayed.
2. Press the ENTER button when the
picture is display. The picture will
freeze and the frame for capturing
appears.
To stop performing, press the RE-
SET or ESC button.
3. Using the buttons ◄/►/▲/▼ adjust
the frame position. Please move the
frame to the position of the picture
which you want to use.
The frame may not be able to be
moved for some input signals.
To start registration, press the ENTER button.
To restore the screen and return to the previous dialog, press the
RESET or ESC button.
Registration takes several minutes. When the registration is com-
pleted, the registered screen and the message "MyScreen registra-
tion is finished." are displayed for several seconds. If the registra-
tion failed, the message "A capturing error has occurred. Please try
again." is displayed.
PJ400
Description
MyScreen
Do you start capturing this picture?
ESC
MyScreen
Move the capture area
ESC
My Screen
below
.
,
+
:NO
ENTER
,
:YES
as you want.
,
+
:RETURN
ENTER
,
:NEXT
45%
36

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pj400Vs10459

Table of Contents