Troubleshooting
Troubleshooting
Related messages
When the unit's power is on, messages such as those shown below may be dis-
played. When any such message is displayed on the screen, please respond as
described below. If the same message is displayed after the treatment, or if a
message other than the following appears, please contact your dealer or service
company.
Although these messages will be automatically disappeared around several min-
utes, it will be reappeared every time the power is turned on.
Message
NO INPUT IS DETECTED
ON ***
SYNC IS OUT OF RANGE
ON *** fH *****kHz fV *****Hz
ViewSonic
There is no input signal.
Please confirm the signal input connection, and the status
of the signal source.
The horizontal or vertical frequency of the input signal
is not within the specified range.
Please confirm the specs for your projector or the signal
source specs.
PJ400
Description
46