Setup Menu; Zoom - ViewSonic PJ400-2 User Manual

Multifunctional settings

SETUP menu

With the SETUP menu, items shown in the table below can
be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Item

ZOOM

KEYSTONE
WHISPER
MIRROR
VOLUME
ViewSonic
Using the buttons ▲/▼ adjusts the zoom (magnifying power).
Large  Small
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data  Lower in the data
• The adjustable range of this function will vary with the type of input
signal. At some signals, this function may not work well.
• When the V:INVERT or the H&V:INVERT is selected under the
item MIRROR, if the projector screen is inclined or if the projector is
angled downward, this function may not work correctly.
Using the buttons ▲/▼ turns off/on the whisper mode.
NORMAL  WHISPER
• When the WHISPER is selected, acoustic noise and screen bright-
ness are reduced.
Using the buttons ▲/▼ switches the mode for mirror status.
NORMAL  H:INVERT  V:INVERT  H&V:INVERT
Using the buttons ▲/▼ adjusts the volume.
High  Low
PJ400
Description
MENU [ RGB ]
:SELECT
PICTURE ZOOM 100
IMAGE KEYSTONE +0
INPUT WHISPER NORMAL
SETUP MIRROR NORMAL
SCREEN VOLUME 16
OPTION
EASY MENU
34