ViewSonic PJ400-2 User Manual page 32

Multifunctional settings
PICTURE menu (continued)
Item
COLOR TEMP
COLOR
TINT
SHARPNESS
ViewSonic
Using the buttons ▲/▼ switches the
mode of color temperature.
HIGH  MIDDLE
CUSTOM  LOW
To adjust CUSTOM
Selecting the CUSTOM and then pressing the
button ► or the ENTER button displays a dialog
to aid you in adjusting the OFFSET and/or GAIN
of CUSTOM mode.
OFFSET adjustments change the color intensity
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity
on the brighter tones of the test pattern.
Choose an item using the buttons ◄/►, and adjust the level using
the buttons ▲/▼.
Using a test pattern
You can display a test pattern for checking the effect of your adjust-
ment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern  Gray scale of 9 steps
Ramp  Gray scale of 15 steps
Using the buttons ▲/▼ adjusts the strength of whole color.
Strong  Weak
• This item can be chosen only at a video signal.
Using the buttons ▲/▼ adjusts the tint.
Green  Red
• This item can be chosen only at a video signal.
Using the buttons ▲/▼ adjusts the sharpness.
Strong  Weak
PJ400
Description
COLOR TEMP [ RGB ]
HIGH
MIDDLE
LOW
CUSTOM
:SELECT
OFFSET GAIN
R G B R G B
+0 +0 +0 +0 +0 +0
ENTER :
OFFSET GAIN
R G B R G B
+0 +0 +0 +0 +0 +0
COLOR TEMP
28