Multifunctional settings
INPUT menu
With the INPUT menu, items shown in the table below can
be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Item
COLOR SPACE
VIDEO FORMAT
ViewSonic
Using the buttons ▲/▼ switches the mode for color space.
AUTO RGB SMPTE240 REC709 REC601
• This item can be chosen only at a RGB signal or a component
video signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
Using the buttons ▲/▼ switches the mode for video format.
AUTO NTSC PAL SECAM
N-PAL M-PAL NTSC4.43
• This item performs only at a video signal from the VIDEO port or
the S-VIDEO port. For a component video signal, the signal type is
identified automatically, independently of this function.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. If the
picture becomes unstable (ex. an irregular picture, a color lack),
please select the mode depending on the input signal.
PJ400
Description
MENU [ RGB ]
:SELECT
PICTURE
COLOR SPACE
AUTO
IMAGE
VIDEO FORMAT
AUTO
INPUT
FRAME LOCK
TURN OFF
SETUP
INFORMATION
SCREEN
OPTION
EASY MENU
32