Table of Contents
Advertisement
Maintenance
Lamp (continued)
A lamp has a finite product life. Using the lamp for long periods of time could
cause the pictures darker or the color tone poor. Note that each lamp has a dif-
ferent lifetime, and some may burst or burn out soon after you start using them.
Preparation of a new lamp and early replacement are recommended.
To prepare a new lamp, contact your dealer and tell the lamp type number.
Type number = RLC-004.
1.
Turn the projector off, and unplug the power cord. Allow the lamp to cool for
at least 45 minutes.
2.
Prepare a new lamp.
If the projector is mounted on the ceiling, or if the lamp has broken, also ask
the dealer to replace the lamp.
In the case of replacement by yourself,
3.
After making sure that the projector has cooled
adequately, slowly turn over the projector, so
that the bottom is facing up.
4.
Please loosen the screw (marked by arrow). Then, unhook
the claws of the lamp cover and remove the lamp cover.
5.
Loosen the 2 screws (marked by arrow) of the lamp,
and slowly pick up the lamp by the handles.
6.
Insert the new lamp, and retighten
firmly two screws that are loosened in
the previous process to lock it in place.
7.
Interlocking the 2 tabs of the lamp
cover to the projector, position the
lamp cover on the projector, and push
the center point of two claws to fix the
lamp cover. Then retighten firmly the
screw of the lamp cover.
8.
Slowly turn the projector so that the top is fac-
ing up.
9.
Turn the projector on and reset the lamp time
using the LAMP TIME function in the OPTION menu.
(1) Press the MENU button to display a menu. Only when the EASY MENU has
appeared, please perform the next step (2).
(2) Point at the "Go To Advance Menu ..." in the menu using ▼/▲ button, then
press the ► button.
(3) Point at the "OPTION" in the left column of the menu using ▼/▲ button, then
press the ► button.
(4) Point at the "LAMP TIME" using ▼/▲ button, then press the ► button. A dialog will appear.
(5) Press the ▲ button to select "RESET" on the dialog. It performs resetting the lamp time.
Claws of lamp cover
Center
point
of claws
Tabs
Advertisement
Table of Contents
