Table of Contents
Advertisement
"In directory" icon key
This key fig. 65 - 66, selected by ro-
tating the encoder 14-fig. 1 and then
confirmed by "ENTER" 15-fig. 1,
stores current displayed site address
in the "Site directory" (with a maxi-
mum of 10 stored addresses), proceed
as follows:
– rotate the encoder 14-fig. 1 to se-
lect the address and then press "EN-
TER" to confirm 15-fig. 1.
fig. 67
Storing the tenth address, the display
shows a dialog box warning the user
that the directory is full and the icon
key ("In directory") is greyed. Further
storing requests a preventive deletion.
A mnemonic string (max. length 30
characters) can be associated to each
stored address fig. 68; proceed as fol-
lows:
– rotate the encoder 14-fig. 1 to se-
lect "Name" key fig. 68 and type in
the required name using the keypad.
F0C4143g
fig. 68
"WAP Options" icon key
This key fig 65 - 66 selected by ro-
tating the encoder 14-fig. 1 and then
confirmed by "ENTER" 15-fig. 1, al-
lows to set up the following WAP op-
tions: address of "Home setup" site,
"Site directory", "Settings".
"Home set-up"
This key fig. 69 selected by rotating
the encoder 14-fig. 1 and then con-
firmed by "ENTER" 15-fig. 1, allows
specification of home site address;
proceed as follows:
– select "Address" key fig. 67 ro-
tating the encoder 14-fig. 1 and then
press "ENTER" to confirm 15-fig. 1
the display shows the keypad and the
editing box for typing the required ad-
dress;
F0C4144g
81
Advertisement
Table of Contents
