Table of Contents
Advertisement
"Dial" function
The "Dial" function fig. 46 enables
the user to enter the list of stored fre-
quent numbers. After selecting an en-
try of the list with the encoder 14-
fig. 1, start the call by pushing button
ß
8-fig. 1; active screen becomes the
one shown in fig. 42. Press "ENTER"
15-fig. 1 to display detailed informa-
tion about selected name and number
and the icons "Call" and "Delete"
fig. 47.
To call the selected number proceed
as follows:
– select the "Call" key rotating the
encoder 14-fig. 1, e and pressing "EN-
TER" to confirm 15-fig. 1;
ß
– push button
8-fig. 1.
fig. 46
To delete the selected number from
the list proceed as follows:
– select "Delete" icon rotating the
encoder 14-fig. 1, a confirmation box
with "YES" - "NO" fig. 48 will come
up;
– rotate the encoder 14-fig. 1, and
select "YES"; all the numbers below
the deleted one are moved up by one
position automatically.
IMPORTANT "Delete" shall be
used specially when the "Frequent
numbers" list is full (9 numbers stored)
and you want to enter a new number.
F0C4042g
fig. 47
"New entry" function
"New entry" icon key is used to copy
an entry from the directory.
To copy an entry from the directo-
ry and add it to the "Frequent num-
bers" list proceed as follows:
– rotate the encoder 14-fig. 1 to se-
lect the "New entry" icon;
– press "ENTER" to confirm 15-fig. 1.
If the list is full (9 numbers), then "New
entry" icon is disabled;
– the display shows a keypad to be
used to type the desired number or the
names stored in the directory fig. 49.
F0C4043g
fig. 48
F0C4044g
69
Advertisement
Table of Contents
