Table of Contents
Advertisement
IMPORTANT Press button ô 2-
fig. 1 to stop recording (see chapter
"Voice recognition" at paragraph
"Storing an entry in the telephone di-
rectory with voice identification" for
further details).
"Delete voice command": allows
deletion of a previously recorded
voice sample; proceed as follows:
– rotate the encoder 14-fig. 1, se-
lect the "Delete voice command" icon
and then press "ENTER" to confirm
15-fig. 1;
– rotate the encoder 14-fig. 1, se-
lect "OK" and then press "ENTER" to
confirm 15-fig. 1, the voice sample
will be deleted from the directory.
IMPORTANT This icon key is ac-
tive only if the concerned entry, in the
directory, is associated to a voice sam-
ple as described previously.
78
"Listen to voice command": repro-
duces a previously recorded voice
sample; proceed as follows:
– rotate the encoder 14-fig. 1, se-
lect the "Listen to voice command"
icon and then press "ENTER" to con-
firm 15-fig. 1; the system will repro-
duce the selected voice sample.
IMPORTANT This icon key is ac-
tive only if the concerned entry, in the
directory, is associated to a voice sam-
ple as described previously.
"OK": confirm changes and stores
them in the directory.
IMPORTANT If the user after end-
ing these operations doesn't select
"OK" and confirm by "ENTER" 15-
fig. 1 new settings will not be stored
in the directory.
"Hear voice directory" icon key
This icon key (Hear voice directo-
ry) allows playback of all the previously
recorded voice samples, stored to al-
low vocal management of telephone
directory; proceed as follows:
– rotate the encoder 14-fig. 1, se-
lect "Hear voice directory" icon and
then press "ENTER" to confirm 15-
fig. 1; the system will reproduce
stored samples.
Press "ESCAPE" to stop 13-fig. 1, as
suggested on the display.
Advertisement
Table of Contents
