Table of Contents
Advertisement
The CONNECT Nav+ system can
control 5 CDs.
At the bottom of the screen are
shown the functions that can be acti-
vated through the corresponding mul-
tifunction keys 17-fig. 1 on the CON-
NECT Nav+ system:
– FM allows audio source change
through the following loop FM1, FM2,
FM3, FMAST, FM1....
– AM allows audio source change
through the following loop MW, LW,
AMAST, MW...
– CD activates CD
– CDC activates CD Changer
– CD1 ...CD5 selects the corre-
sponding CD in the multiple player
(only the keys corresponding to the
actual CDs inside the player are active)
– RPT enables the Repeat function:
Repeat one (repeat one track)/Repeat
all (repeat all tracks)/Repeat off (re-
peat function off)
– AUX presetting for connection to
an external video source (not available
yet).
– Ù MUTE on/off (regardless of the
audio source active).
The main screen shows also the fol-
lowing information fig. 24:
– number of the track being played;
– CD name, only if the CD when in-
serted has been named;
– TA wording if the TA-Traff. Ann
function (traffic announcement) is en-
abled);
– playback track number;
– current status of CDC source
(play, pause, stop);
– CD time information;
fig. 24
– the numbers of the next 10 tracks
that will be played and symbol "
there are more than 10 tracks; with
the Shuffle function on (for random
playing sequence), the first 10 CD
tracks of the random numeric se-
quence are displayed.
Selecting the CD-Changer, playback
starts from the last CD heard previ-
ously or from the first CD following
the last one being heard (if this one
was removed) present in the loader.
To change the current CD use the
keypad buttons 17-fig. 1 corre-
sponding to CD1....CD5. To hear the
previous or next track of the current
CD respectively press buttons "
22-fig. 1 or "
˙˙
If the selected CD is not in the
loader, the relevant button is disabled.
F0C4019g
§
" if
¯¯
"
" 18-fig. 1.
45
Advertisement
Table of Contents
