Table of Contents
Advertisement
"Near destination"
This function enables to find the re-
quired services near the selected des-
tination. The available options are
"Destination", "Category" and "List of
services" fig. 120.
After selecting the destination and
selected service, information can be
obtained and the service can be lo-
cated using "Info" and "Atlas". Select
"Calculate route" rotating the en-
coder 14-fig. 1 and press "ENTER"
15-fig. 1 to confirm selection.
108
fig. 120
"Near address"
This is used to identify the services
sought nearest to the address set. The
available options are "Category",
"Place name", "Street", "Street num-
ber" and "List of services" fig. 121.
After selecting the required service,
associated information and location
may be obtained using "Info" and
"Map". Select "OK" by rotating the
encoder 14-fig. 1 and press "ENTER"
15-fig. 1 to confirm selection.
F0C4213g
fig. 121
"Name"
Service selection by "Name" is used
to select a known service as the des-
tination by entering "Category", "Place
name" and "Service name" fig. 122.
After confirming the selected service,
associated information and location
may be obtained using "Info" and "At-
las". Select "Calculate route" by ro-
tating the encoder 14-fig. 1 and press
"ENTER" 15-fig. 1 to confirm selec-
tion.
F0C4214g
fig. 122
F0C4215g
Advertisement
Table of Contents
