Table of Contents
Advertisement
Detour: allows the user to choose
(if possible) an alternative route to
reach the selected destination, avoid-
ing a specified portion of the current-
ly calculated route.
To activate this function, select the
route portion to be avoided fig. 104
using the encoder 14-fig. 1 and then
press "ENTER" 15-fig. 1 to confirm.
The display will then show the new
distance and the time necessary to
reach the destination fig. 105.
Selecting "YES" or "NO" by the en-
coder 14-fig. 1 and pressing "ENTER"
to confirm 15-fig. 1, the user can ac-
cept or reject the new route.
100
fig. 104
If there is no alternative route, then
the display shows "No alternative
route" fig. 106.
Mute: enables/disables navigation
voice guidance.
Right vertical bar icons are:
Other menus: shows a second page
of navigation menu.
Select address: lets the user select
a geographical point (through address,
directory...).
Activate RG: enables/disables route
guide. If RG is disabled, then voice mes-
sages, cross icons and zooms are no
more available. If a route is active when
F0C4067g
fig. 105
RG is disabled, it remains visible on the
map, while automatic route recalcula-
tion (if user leaves route) is not active.
Volume: sets the voice instruction
volume level.
Set route: defines route calculation
parameters.
Scale: allows change of map scale.
Push on the icon key shows available
scales (100m ÷ 200km).
If the user arrives near a cross and
cross zoom function is enabled, the
system provides cross zoom as shown
in fig. 107.
F0C4068g
fig. 106
F0C4069g
Advertisement
Table of Contents
