Table of Contents
Advertisement
Independent driver's side
door unlocking
To activate/deactivate independent
driver's side door unlocking.
When this function is on only the dri-
ver's door will be unlocked.
When this function is off all doors
will be unlocked.
To turn this function on/off, rotate
the encoder 14-fig. 1 to select "Inde-
pendent driver's side door unlocking"
and then press "ENTER" 15-fig. 1.
When "✓" is displayed the function
is active.
Independent trunk
lid opening
To activate/deactivate independent
trunk lid unlocking.
When this function is on, trunk lid
stays locked when the other doors are
unlocked.
When this function is off, trunk lid
is unlocked like the other doors.
156
To turn this function on/off, rotate
the encoder 14-fig. 1 to select "In-
dependent trunk lid opening" and then
press "ENTER" 15-fig. 1.
When "✓" is displayed the function
is active.
OK
To activate and to store settings, se-
lect "OK" by rotating the encoder 14-
fig. 1 and then press "ENTER" 15-
fig. 1.
SECOND MENU - fig. 172
To open the second menu from the
screen shown in fig. 169, select "Next
menu" by rotating the encoder 14-fig.
1 and then press "ENTER" 15-fig. 1
to confirm.
The display shows the screen in fig.
172.
To go back to the first menu, select
"Previous menu" by rotating the en-
coder 14-fig. 1 and then press "EN-
TER" 15-fig. 1 to confirm.
Autoclose
IMPORTANT This setting is only
possible if the car is equipped with the
system (see further details in
EASY GO
chapter
on the Owner Hand-
EASY GO
book to which this Supplement is at-
tached to).
When this function is on, doors are
locked automatically when the CID
(Customer Identification Device)
leaves the car.
When this function is off, doors are
not locked automatically when the
CID leaves the car.
fig. 172
F0C4172g
Advertisement
Table of Contents
