Table of Contents
Advertisement
CD Prog
Select the "CD Prog" icon with the
encoder 14-fig. 1 and press "ENTER"
15-fig. 1 to access the CD Prog func-
tion menu fig. 20:
– Select
– Delete
– Delete all
– OK.
While playing a CD this icon key is
disabled, regardless of the "Prog" func-
tion status (on/off); the icon key will
return active when you stop the CD.
42
fig. 20
Select
"Select" icon enables to define CD
track playing sequence. To turn the
function on, select the icon rotating
the encoder 14-fig. 1 and press "EN-
TER" 15-fig. 1; this way access to nu-
meric sequence box is provided. Turn
the encoder 14-fig. 1 to select the re-
quired number corresponding to the
first track of the CD you want to lis-
ten to, then press "ENTER" to con-
firm 15-fig. 1. Proceed in the same
way to programme the sequence of
the other tracks. Press "ESCAPE" 13-
fig. 1 to quit.
To store the chosen sequence, select
"OK" with the encoder 14-fig. 1 and
then press "ENTER" 15-fig. 1.
F0C4017g
Delete
"Delete" icon enables to clear off the
last stored track.
This key is disabled if the sequence is
empty.
To turn the function on, select
"Delete" icon rotating the encoder
14-fig. 1 and then press "ENTER" 15-
fig. 1.
Delete all
"Delete all" icon enables to delete
the entire track list stored.
This key is disabled if the sequence is
empty.
To turn the function on, select
"Delete all" icon rotating the encoder
14-fig. 1 and then press "ENTER" 15-
fig. 1.
Advertisement
Table of Contents
