Table of Contents
Advertisement
Telephone state
Accept call
Incoming call
End call or stop dial
Active call
Stand-by
Display last dialled number or, with a second
push within 5 seconds, call start
With reconfigurable multifunction
display, long push on ß 6-fig. 2 will
display a menu (where provided) on
the instrument panel that enables to
choose directory (by pushing
last numbers called (by pushing
Short push
(less than 1 second)
Push on
¯¯
and
Push on ß 8-fig. 1 or ß 6-fig. 2 to
start the call.
At the same time, all CONNECT
˙˙
) or
Nav+ telephone functions and buttons
¯¯
).
are disabled fig. 3.
Refuse call
Only with reconfigurable multifunction display:
display of the main phone menu on the
instrument panel display. Then, press Scan
¯¯
or Scan
numbers called.
A further short push on
Pushing on ß 8-fig. 1 or a 5-seconds
˙˙
to scroll the list.
timeout with no user intervention, will
enable the telephone functions again.
fig. 3
Long push
(more than 1 second)
–
to select directory or last
ß
will start the call.
˙˙
F0C40004g
15
Advertisement
Table of Contents
