Table of Contents
Advertisement
If in place of "Street" the user spec-
ifies "C", it means "downtown" and
so neither "Street number" and "2nd
street" must be input.
The navigation system always guide
you downtown in case of small towns.
After setting the street name, press
"ENTER" 15-fig. 1 to confirm and to
go to next screen to input the street
number. Push on "ESCAPE" 13-fig. 1
gets to previous screen without set-
ting the street name.
"Street number"
Destination street number is ob-
tained after entering the street name.
Select "Street number" by rotating the
encoder 14-fig. 1 and pressing "EN-
TER" to confirm 15-fig. 1.
To input digits, select them by rotating
the encoder 14-fig. 1 and then press
"ENTER" to confirm 15-fig. 1.
"2nd street"
This option is used to enter the name
of a second street that intersects the
first entered street, so that the se-
lected destination is the intersection
between the two streets.
The second street name can be en-
tered, after entering the place name
and the first street name. Select "2nd
street" by rotating the encoder 14-fig.
1 and press "ENTER" to confirm 15-
fig. 1.
To input the 2nd street name char-
acters, select them by rotating the en-
coder 14-fig. 1 and then press "EN-
TER" to confirm 15-fig. 1.
"Calculate route"
This option will activate route calcu-
lation to the required destination.
If a destination is already set, the sys-
tem will ask for confirmation before
changing destination.
"Other options"
– Directory
This function is used to store the se-
lected address into the navigation sys-
tem directory and to associate it to a
name for easy retrieval fig. 111.
The name to be associated with the
destination can be entered, after se-
lecting and confirming "Name", by ro-
tating the encoder 14-fig. 1 and press-
ing "ENTER" to confirm 15-fig. 1.
IMPORTANT When selecting
"Name", remember that it is not pos-
sible to add a name already present in
the Telephone (TEL) function direc-
tory.
fig. 111
F0C4212g
103
Advertisement
Table of Contents
