Table of Contents
Advertisement
To enter the characters simply select
them one by one by rotating the en-
coder 14-fig. 1 and then press "EN-
TER" to confirm 15-fig. 1.
After completing the name, select
"OK".
The "Voice recognition" key allows
to associate a voice sample to a des-
tination stored in the directory. Sym-
bol " " at the left of the key shows if
a sample has already been associated.
Selecting and confirming "Voice recog-
nition" will display the screen in
fig. 112:
New voice command": allows
recording of a new voice sample. User
is invited to pronounce twice the
name to be recorded.
104
fig. 112
"Delete voice command": allows
deletion of a previously recorded
voice sample. If there is no sample, this
key is disabled.
"Listen to voice command": repro-
duces a previously recorded voice
sample. If there is no recorded sam-
ple, this key is disabled.
To select the required function, ro-
tate the encoder 14-fig. 1 and press
"ENTER" to confirm 15-fig. 1.
When a geographical point is select-
ed on the map, by moving the cross-
shaped cursor and pressing "ENTER"
15-fig. 1, the display will show the
screen in fig. 113 with the following
options: Destination, Directory, Ser-
vice Info, Locate, RDS-TMC, Home 1,
Home 2.
F0C4076g
fig. 113
– Home 1 and Home 2: store the
selected point in the relevant memo-
ries.
If a point has already been previous-
ly stored as "Home 1" or "Home 2",
a warning box asks the user for con-
firmation about substitution.
Pressing H1 or H2 17-fig. 1 and then
"ENTER" 15-fig. 1 to confirm, will
start route calculation to the destina-
tion stored in Home 1 or Home 2.
"Atlas"
From screen in fig. 114 pressing one
of the multifunction keys 17-fig.1 cor-
responding to "Atlas" will display a map
where the destination is identified by a
cross-shaped cursor.
The map is always represented with
North at the top of the display and
with "100 m" scale.
F0C4211g
There are three available icon keys:
R E
: press the corresponding multi-
function key 17-fig. 1, a rotation of the
encoder 14-fig. 1 will move the cross
cursor horizontally;
Advertisement
Table of Contents
