Table of Contents
Advertisement
Choosing "Map" will automatically
display the point on the map, with the
possibility to enter it as navigation sys-
tem destination. In this case the mes-
sage will also be stored automatically.
Choosing "Call" the telephone num-
ber contained in the message will be
dialled automatically and the message
will be stored.
Should a sequence of messages be
received, a specific window will be
opened for each of them and for each
of them it will be possible to perform
the storage, deletion, display on the
map or call phone number operations.
148
fig. 161
"Select" function
If they are not deleted, all the mes-
sages received are stored. The list with
all the messages can be seen in the
bottom of the display, in the screen
with "Infomobility" function fig. 162.
A maximum of ten messages can be
stored: further arrivals overwrite the
oldest one. Every message is identified
by an icon recalling the message type
and an envelope recalling the message
status: read or not (sealed envelope =
unread message, open envelope =
read message).
F0C4125g
To access single messages of the list
which may contain information on the
traffic, points of interest or weather
information, activate the "Select" func-
tion with the encoder 14-fig. 1 and
press "ENTER" to confirm 15-fig. 1,
then turn the encoder 14-fig. 1 to
scroll the list of messages (also the in-
visible part).
When the message you want to read
is highlighted, press "ENTER" 15-fig. 1
to view to on the display.
fig. 162
F0C4126g
Advertisement
Table of Contents
