Safety Information - GEM 1231 Operating Instructions Manual

Electrical position indicator atex
Hide thumbs Also See for 1231:
Table of Contents

Advertisement

Symbol
Danger from potentially explosive atmosphere

2 Safety information

The safety information in this document refers only to an individual product. Potentially dangerous conditions can arise in
combination with other plant components, which need to be considered on the basis of a risk analysis. The operator is re-
sponsible for the production of the risk analysis and for compliance with the resulting precautionary measures and regional
safety regulations.
The document contains fundamental safety information that must be observed during commissioning, operation and mainten-
ance. Non-compliance with these instructions may cause:
Personal hazard due to electrical, mechanical and chemical effects.
Hazard to nearby equipment.
Failure of important functions.
Hazard to the environment due to the leakage of dangerous materials.
The safety information does not take into account:
Unexpected incidents and events, which may occur during installation, operation and maintenance.
Local safety regulations which must be adhered to by the operator and by any additional installation personnel.
Prior to commissioning:
1. Transport and store the product correctly.
2. Do not paint the bolts and plastic parts of the product.
3. Carry out installation and commissioning using trained personnel.
4. Provide adequate training for installation and operating personnel.
5. Ensure that the contents of the document have been fully understood by the responsible personnel.
6. Define the areas of responsibility.
7. Observe the safety data sheets.
8. Observe the safety regulations for the media used.
During operation:
9. Keep this document available at the place of use.
10. Observe the safety information.
11. Operate the product in accordance with this document.
12. Operate the product in accordance with the specifications.
13. Maintain the product correctly.
14. Do not carry out any maintenance work and repairs not described in this document without consulting the manufacturer
first.
In cases of uncertainty:
15. Consult the nearest GEMÜ sales office.
www.gemu-group.com
Meaning
5 / 24
2 Safety information
GEMÜ 1231

Advertisement

Table of Contents
loading

Table of Contents