Table of Contents
Advertisement
10.3.2 Assembly of mounting kit with stroke limiter
1. Screw in adapter 2 using wrench surface 1.
2. Set stroke limiter to the desired height using wrench surface 4.
3. Secure nut 5 against the actuator top.
4. Only use thread sealing ring 6 for installation of stroke limiters in case of control functions 2 and 3
10.4 Assembly of mounting kit without thread
1
1. Insert spindle of mounting kit 1 into actuator.
2. Carefully knock down the spindle of mounting kit 1 with an appropriate tool 2 until it stops.
3
3. Screw in guide piece 3 using the wrench surface.
4. Mounting kit 1 is correctly assembled.
10.5 Assembly and installation of the electrical position indicator
Danger of explosion
▶ Danger of death or severe injury.
Do not use the product as a step or foothold.
●
Prior to commissioning, ensure that the cover is fully closed and that the housing and the O-ring are not
●
damaged.
www.gemu-group.com
1
4
5
6
2
2
1
4
DANGER
13 / 24
10 Assembly and installation
GEMÜ 1231
Advertisement
Table of Contents
