General Information; Information; Symbols Used; Warning Notes - GEM 1231 Operating Instructions Manual

Electrical position indicator atex
Hide thumbs Also See for 1231:
Table of Contents

Advertisement

1 General information

1 General information

1.1 Information

The descriptions and instructions apply to the standard versions. For special versions not described in this document
the basic information contained herein applies in combination with any additional special documentation.
Correct installation, operation, maintenance and repair work ensure faultless operation of the product.
Should there be any doubts or misunderstandings, the German version is the authoritative document.
Contact us at the address on the last page for staff training information.

1.2 Symbols used

The following symbols are used in this document:
Symbol
Tasks to be performed
Response(s) to tasks
Lists

1.3 Warning notes

Wherever possible, warning notes are organised according to the following scheme:
SIGNAL WORD
Type and source of the danger
Possible
symbol for the
Possible consequences of non-observance.
specific
Measures for avoiding danger.
danger
Warning notes are always marked with a signal word and sometimes also with a symbol for the specific danger.
The following signal words and danger levels are used:
Imminent danger!
▶ Non-observance can cause death or severe injury.
Potentially dangerous situation!
▶ Non-observance can cause death or severe injury.
Potentially dangerous situation!
▶ Non-observance can cause moderate to light injury.
Potentially dangerous situation!
▶ Non-observance can cause damage to property.
The following symbols for the specific dangers can be used within a warning note:
GEMÜ 1231
Meaning
DANGER
WARNING
CAUTION
NOTICE
4 / 24
www.gemu-group.com

Advertisement

Table of Contents
loading

Table of Contents