Table of Contents
Advertisement
13 Inspection and servicing
13 Inspection and servicing
Exceptional maintenance work!
▶ Damage to the GEMÜ product.
Any maintenance work and repairs not described in these operating instructions must not be performed without consult-
●
ing the manufacturer first.
The operator must carry out regular visual examination of the products depending on the operating conditions and the poten-
tial danger in order to prevent leakage and damage.
1. Have servicing and maintenance work performed by trained personnel.
2. Wear appropriate protective gear as specified in plant operator's guidelines.
3. Shut off plant or plant component.
4. Secure plant or plant component against recommissioning.
5. Depressurize the plant or plant component.
6. Actuate products which are always in the same position four times a year.
7. Carry out inspection and servicing for products in the potentially explosive area to DIN EN 60079-17.
13.1 Spare parts
No spare parts are available for this product. If it is faulty, please return it to GEMÜ for repair.
13.2 Setting the switching positions
For limit switch setting see chapter "Assembly and installation of the electrical position indicator" steps 1 to 14.
13.3 Cleaning the product
Danger of explosion
▶ Risk of death or severe injury.
Danger from sparking. Only clean the product with an anti-static or damp cloth.
●
Do not clean the product with a high pressure cleaning device.
–
14 Disassembly
1. Switch off power to the product.
2. Remove the potential equalisation device.
3. Remove the cover 2.
4. Remove the individual wires from the terminal strip.
5. Remove the connection cable.
6. Dismantle the mounting kit/product in the opposite order to that described in the Assembly chapter.
15 Disposal
1. Pay attention to adhered residual material and gas diffusion from penetrated media.
2. Dispose of all parts in accordance with the disposal regulations/environmental protection laws.
3. Dispose of electronic components separately.
16 Returns
Legal regulations for the protection of the environment and personnel require that the completed and signed return delivery
note is included with the dispatch documents. Returned goods can be processed only when this note is completed. If no return
delivery note is included with the product, GEMÜ cannot process credits or repair work but will dispose of the goods at the op-
erator's expense.
1. Clean the product.
2. Request a return delivery note from GEMÜ.
3. Complete the return delivery note.
4. Send the product with a completed return delivery note to GEMÜ.
GEMÜ 1231
NOTICE
DANGER
18 / 24
www.gemu-group.com
Advertisement
Table of Contents
