Beko QWIK-PURE 15 Installation And Operation Manual page 79

Installation and operation manual
Illustration
3 sec
Description / explanation
The FRC switches to standby mode
0 All LEDs go out and the status LED STATUS BAR
flashes white at regular intervals.
0 The condensate passes through the filter
cartridges only by gravity.
2. Press and hold down the Service button and the
menu button simultaneously for 3 seconds.
3. Release the Service button only.
4. Release the menu button.
0 The IP settings are reset to the factory settings.
5. Press and hold down the ON/OFF button for
3 seconds.
0 The FRC switches from standby mode to normal
mode.
QWIK-PURE
®
79 | 124