QWIK-PURE
®
9.2.7 Setting number of filter cartridges
NOTE
INFORMATION Initial commissioning.
i
Illustration
5 x
3 sec
3 sec
76 | 124
Configuring the number of filter cartridges!
Entering the wrong number of filter cartridges may result in property damage,
environmental damage, or impaired operation.
•
Make sure to set the correct number of filter cartridges being used.
Start from step 3 for initial commissioning.
The LED NUMBER OF FILTER CARTRIDGES and the Status LED FILTER CARTRIDGE
SELECTION flashing green at the same time.
Skip steps 1 and 2.
Description / explanation
1. Press the menu button five times.
0 The status LED FILTER CARTRIDGE SLECTION
flashes green.
2. Press and hold the Service button for 3 seconds.
0 The LED NUMBER OF FILTER CARTRIDGES
flashes green.
Installation and operation manual