Switching The Frc On And Off - Beko QWIK-PURE 15 Installation And Operation Manual

Installation and operation manual

9.2.2 Switching the FRC on and off

Illustration
INFORMATION Initial commissioning.
i
3 sec
The FRC will start with the SET NUMBER OF FILTER CARTRIDGES menu during
initial commissioning only, and the Status LED FILTER CARTRIDGE SELECTION will
flash green.
• Set the number of filter cartridges in order to get to the START MENU.
3 sec
Description / explanation
Switching on the FRC
Press and hold down the ON/OFF button for 3 seconds.
0 The FRC switches from standby mode to normal
mode.
0 The START MENU will appear.
0 The FRC regulates the condensate flow of
QWIK‑PURE .
®
Switch off FRC
Press and hold down the ON/OFF button for 3 seconds.
0 The FRC switches to standby mode.
0 All LEDs go out and the status LED STATUS BAR
flashes white at regular intervals.
0 The condensate is conveyed through the filter
cartridges by gravity only.
QWIK-PURE
®
71 | 124