Parts And Their Functions; Control Panel - Panasonic AW-RP605 Operating Instructions Manual

Parts and their functions

$ Control panel

OPERATE
1
ON
2
OFF
INCOM
3
4
LEVEL
IRIS
6
AUTO
MANU
LOCK
1 OPERATE lamp
This comes on when power is supplied to the main unit
and both the DC POWER switch on the main unit and the
OPERATE switch on the control panel are set to ON.
It goes off when either switch is set to OFF.
It flashes when a disconnection or some other problem
has occurred with the cable which is used to connect the
main unit and control panel.
2 OPERATE switch
This is used to control the power supply of all the pan-tilt
head systems (each of which consists of a pan-tilt head
and convertible camera) which have been connected to
the main unit.
3 INCOM connector
The headset for inter-communications purposes is
connected here.
4 LEVEL control
This is used to adjust the volume of the headset's
receiver.
5 CALL button
When this button is pressed, the buzzers on the other
connected control panels sound, and the CALL button's
lamp comes on.
6 IRIS [AUTO/MAN/LOCK] button
This is used to select how to adjust the lens iris of the
pan-tilt head system currently selected.
Each time it is pressed, the AUTO, MANU or LOCK
setting is selected in turn.
AUTO : The lens iris is adjusted automatically, and the
IRIS button's lamp comes on. If the FOCUS/IRIS
dial for adjusting the iris is rotated when AUTO
has been selected, the IRIS button's lamp flashes
as a warning.
5 7 8 9
IRIS ZOOM FOCUS
OPEN TELE FAR WHITE AWC
GAIN BAL
AUTO
A
MANU
MODE
BAR NG
B
CAM OK
ABC
DATA SET
ATW
CALL
TR/PSET M.LOCK 1 2 3
CLOSE WIDE NEAR
TR
PSET
TELE 11 12 13
MEMORY
EMPTY
21 22 23
IRIS
FOCUS
31 32 33
41 42 43
CLOSE OPEN
NEAR WIDE FAR
ZOOM/FOCUS/IRIS
LIMIT
ON
CAMERA CONTROL
LAMP
LCD
CONTRAST
START
R/B
POINT
CAMERA
GAIN/PED MENU OK
CONTROL
TRACING/PRESET MEMORY
4 5 6 7 8 9 10 PRIORITY
14 15 16 17 18 19 20
SPEED
LOW
FULL
HIGH
24 25 26 27 28 29 130
IRIS
FOCUS
L
34 35 36 37 38 39 40
44 45 46 47 48 49 50
CLOSE
NEAR
LIMIT
OFF
MANU : The lens iris is adjusted manually using the
FOCUS/IRIS dial.
At this setting, the IRIS button's lamp goes off.
LOCK : The lens iris is fixed at the position where it was
adjusted manually, and the IRIS button's lamp
flashes.
At the LOCK setting, the position of the lens iris
will not be changed even if the FOCUS/IRIS dial
is turned.
<Note>
Set the button to the MANU position when entering the
lens iris position in the TRACING/PRESET MEMORY
button.
7 IRIS indicator
This indicates the lens iris position of the pan-tilt head
system currently selected using 12 steps (from CLOSE to
OPEN).
8 ZOOM indicator
This indicates the lens zoom position of the pan-tilt head
system currently selected using 12 steps (from WIDE to
TELE).
9 FOCUS indicator
This indicates the lens focus position of the pan-tilt head
system currently selected using 12 steps (from NEAR to
FAR).
<Note>
The IRIS, ZOOM and FOCUS indicator displays may not
appear depending on the model of pan-tilt head and
camera used.
Contact your local dealer for details.
4
PAN/TILT SET
DEF WIP H/F EXT ND OPTION
TRACING MEMORY
START/STOP RESTORE RESET
TALLY
1 2 3 4 5 AUX
CONTROL/PREVIEW MONITOR OUT SEL
UP
R
OPEN
DOWN FAR
PAN/TILT/FOCUS/IRIS