Panasonic AW-RP605 Operating Instructions Manual page 15

Parts and their functions
$ Main unit
EXT/
SERVICE
E VIDEO/Y OUT connector
The video signals adjusted by the cable compensation
circuit to match the length of the cable from the pan-tilt
head to the main unit are output from this connector.
One end of a coaxial cable is connected here and the
other end is connected to the video input connector or the
Y signal input connector on a TV monitor, special effects
generator, VTR or other equipments.
F Pr OUT connector
When component signals are supplied to the multi-
function controller, the Pr signals adjusted by the cable
compensation circuit to match the length of the cable
from the pan-tilt head to the main unit are output from this
connector.
One end of a coaxial cable is connected here and the
other end is connected to the Pr input connector on a TV
monitor, special effects generator, VTR or other
equipments.
G Pb OUT connector
When component signals are supplied to the multi-
function controller, the Pb signals adjusted by the cable
compensation circuit to match the length of the cable
from the pan-tilt head to the main unit are output from this
connector.
One end of a coaxial cable is connected here and the
other end is connected to the Pb input connector on a TV
monitor, special effects generator, VTR or other
equipments.
G/L
IN
75Ω
AUTO
AUX
IN
75Ω
PREVIEW
MONITOR
OUT 1
REMOTE
PREVIEW
MONITOR
OUT 2
PREVIEW
MONITOR
OUT 3
5 4 3
5 4 3 2 1
CONTROL OUT
TALLY
TO PAN/TILT HEAD
I
TO PAN/TILT
HEAD
VIDEO
/Y
IN
Pr
IN
Pb
IN
OPTION
CARD
G/L
OUT
VIDEO
/Y
OUT
Pr
OUT
Pb
OUT
TERMINATION
TALK - + TALK
6 5
4 3
2 1
OFF ON
RECEIVE - + RECEIVE
2 1 EXTERNAL 3
INCOM
CONTROL
CONTROL IN
OUT
TO CONTOROL PANEL
H OPTION CARD slot
When component signals are supplied to the multi-
function controller, and an AW-PB302 RGB card, AW-
PB304 SDI card, AW-PB307 SVGA convert card or AW-
PB309 Web card (optional accessories) is installed in this
slot, signals utilizing the functions of the installed card
can be output.
For further details, refer to the operating instructions of
the card concerned.
<Notes>
O When an optional card is to be installed in the multi-
function controller, the AW-PB302 RGB card (optional
accessory) must be installed in the convertible
camera.
O A pan-tilt head system cannot be controlled through
network even if the AW-PB309 Web card has been
installed in the multi-function controller.
I VIDEO BOARD slots 1 to 5
Each pan-tilt head system requires one VIDEO board.
A VIDEO board is already installed in slot 1 and four
other AW-PB605 VIDEO boards (optional accessories)
can be installed to increase the number of pan-tilt head
systems.
<Notes>
O There is no need to install a VIDEO board if the multi-
function controller is employed merely to operate a
pan-tilt head system and not to process video signals.
O When any optional cards are installed, the AJ-B75 AC
adapter (optional accessory) should be connected to
the DC 12V IN socket if the total power consumption,
including that of this unit, exceeds 30 W.
15
DC POWER
ON
OFF
H
- +
1 4
3 E
2
F
DC 12V IN
PUSH
G
GND
CONTROL PANEL
POWER OUT
2 1