Step 4: Connect The Cables - Roland TU4-64 User Manual

Assembly and Installation

Step 4: Connect the cables.

WARNING
Connect to an electrical outlet that complies with this machine's ratings (for voltage, frequency,
and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
WARNING
Do not use with any electrical power supply that does not meet the ratings displayed on the AC
adapter.
Use with any other power supply may lead to fire or electrical shock.
WARNING
Never use any AC adapter or power cord other than those included with the machine.
Use with any other power supply may lead to fire or electrical shock.
Procedure
1.
Insert the printer connection cable into the printer connector on the printer unit.
On the printer unit, the printer connector is located:
• At the bottom of the front panel of the VF2-640, VG2-640/540, VG-640/540.
• At the bottom of the front panel of the SG2-640/540/300, SG-540/300.
• On the rear panel of the LEC2-300.
• On the side panel of the LEC2-640/330, MG-640/300, UG-641.
2.
Insert the printer connection cable into the printer connector on the control box.
*1 If there are three connectors, connect the cable to the one labeled "TAKE UP."
20
Assembly and Installation
*1