Roland TU4-64 User Manual page 17

Assembly and Installation
(5)
Use the hexagonal wrench (small) to temporarily tighten the bolts fixing mounting bracket C (left
side) to one instance of mounting bracket B and mounting bracket D (right side) to the other in-
stance of mounting bracket B.
Attach mounting bracket C (B) to mounting bracket B (A)
with bolts (small).
(6)
While pushing the slider stays against the stand legs, fully tighten the bolts holding them in place.
16
Assembly and Installation
Left side Right side
Attach mounting bracket D (D) to mounting bracket B (A)
with bolts (small) (C) and bolts with washers (E).