How to Load Media
Step 4: Taking Up the Media
Procedure
1.
Set the AUTO switch on the take-up unit.
• Take-up with outward curl
Set the switch to [FORWARD].
• Take-up with inward curl
Set the switch to [BACKWARD].
MEMO
When no media is loaded, lower the dancer roller all the way to the back.
2.
Select the mode to match the media to be used.
Select either [STANDARD] or [TENSION] using the MODE switch.
Mode
[STANDARD]
[TENSION]
3.
Press [ENTER].
The screen shown in the figure appears.
32
Operation
Applicable media
PVC etc.
Tarpaulin, etc.
Description
The media is taken up with some slack. This is suited to stiff or
slippery media.
The media is stretched and taken up. This is suited to weak me-
dia and media that does not slip easily.