Connecting The Cables - Roland DU2-64 Supplementary Manual

Connecting the Cables

Connect to an electrical outlet that complies with this machine's ratings (for
WARNING
voltage, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
Connect the machine to ground.
WARNING
This can prevent fire or electrical shock due to current leakage in the event of
malfunction.
Perform this task with all power switches left switched off.
WARNING
Failure to observe this instruction may cause the machine to move suddenly,
resulting in injury.
The printer and the drying-heater unit require separate high-capacity electrical outlets.
Make sure to connect the two power cords to outlets on separate systems. Also, make sure
that the electrical outlets meet the machine's ratings.
* The VG-640 is used for the printer in the figures.
Connect the drying-heater unit and blower-fan unit cables, and the power cord.
Power Cord
Power cord
Power-cord
connector
Electrical
outlet
13
1. Introduction