Step 3: Attaching the Cable Clamps
•
When using the VF2-640, VG2-640/540, SG2-640/540/300, LEC2-300, VG-640/540, SG-540/300
Attach the large (A) and small (B) cable clamps to the positions shown in the figure.
•
When using the LEC2-640/330, MG-640/300, UG-641
1. Attach the large (A) and small (B) cable clamps included with the TUC-4. (There are three cable
clamps in total.)
2. Attach the cable clamps (C) included with the printer. (There are two cable clamps in total.)
Assembly and Installation
Assembly and Installation
19