How to Load Media
3.
Install the paper tube to the end cap and fix the arm.
(1)
Right side: Push the paper tube against the stand leg side end cap and fit it securely.
(2)
Left side: Push the arm side end cap against the paper tube and fit it securely.
(3)
Tighten the arm retaining screw while pushing the arm forward.
IMPORTANT
• Do not overtighten the arm retaining screw.
Overtightening may make it difficult to remove the arm.
• Use the paper tube that is included with the roll.
If a different tube is used, the media may not be taken up because the roll may fail to engage.
28
Operation