Roland TU4-64 User Manual page 19

Assembly and Installation
MEMO
Before you proceed to the next operations, the machine must be adjusted by a suitably qualified work-
er. Leave this work to the suitably qualified worker.
(2)
Fully tighten the bolts in order, right slider stay followed by left slider stay.
(3)
Fix the take-up unit to the stand using mounting bracket E.
Use the hexagonal wrench (large) to insert the bolts with washers (large) (A) and the bolts
(large) (B).
MEMO
When fixing the take-up unit to the left stand, perform the work from the rear of the printer.
4.
Install the dancer roller.
(1)
Insert the left and right arms of the dancer roller into the left and right shafts and align the posi-
tions of their holes.
(2)
Temporarily tighten the bolts with washers (large) in order, right slider stay followed by left slider
stay.
(3)
Fully tighten the bolts in order, right slider stay followed by left slider stay.
18
Assembly and Installation