The Take-Up Unit Doesn't Take Up Media; Are The Power Cord And Ac Adapter Properly Connected; Is The Auto Switch Set To [Off]; Is The Auto Switch Direction Properly Set - Roland TU4-64 User Manual

The Take-up Unit Doesn't Take Up Media

Are the power cord and AC adapter properly connected?

Securely connect them so that they are not plugged in loosely and will not come loose.

Is the AUTO switch set to [OFF]?

Set the AUTO switch in accordance with the take-up direction.

Is the AUTO switch direction properly set?

Make sure the direction of the AUTO switch matches the take-up direction of the media.

Is the media automatic cut-off function active?

Take-up will be interrupted if the media is cut off.
Set the computer (software RIP) side so that the printer will not automatically cut off. For information on
the automatic cut-off settings, refer to the documentation for the software RIP.

Is the paper tube loaded properly?

Fit the paper tube securely onto the end cap.
If it is not properly attached, the media may not be taken because the paper roll may fail to engage.
RELATED LINKS
・
P. 27Loading the Paper Tube

Is the paper tube used the one that is included?

Use the paper tube that is included with the roll. If a different roll is used, the media may not be taken
because the roll may fail to engage.
RELATED LINKS
・
P. 26About the Paper Tube

Is the paper tube bent?

If the paper tube is bent, the media cannot be taken up properly.
Have the media take-up direction and the AUTO switch of the TUC been set
correctly?
Cancel printing, check the AUTO switch setting, and then reload the media once more starting from the
beginning.
RELATED LINKS
37
What to Do If