Step 3: Securing The Media On The Paper Tube (Core) - Roland TU4-64 User Manual

How to Load Media

Step 3: Securing the Media on the Paper Tube (Core)

Procedure
1.
Make sure the screen in the figure is displayed.
LOAD SHEET
TO TAKE-UP
2.
Press [▼] to feed out the media until the tip of the media reaches the paper tube.
Check that the media is fed out straight.
If the media is not feeding straight, perform the loading operation once again.
Media is fed out 10 mm (0.39 in.) each time you press [▼]. Holding down the key lets you feed out
paper continuously.
3.
Attach the center and both ends of the media to the paper tube (core) using adhesive tape (A) (three
locations in total).
(1)
While pulling the media so that it does not sag, secure the center of the media.
(2)
While pulling the media from the center toward the outer edges, and fix the left and right edges.
• Take-up with outward curl
• Take-up with inward curl
30
Operation